UCC4000-50GK-B26-V15-Y70169750 Ultrasonic Sensor

Single head system

주요 혜택 한눈에 보기

  • Thread M50
  • PTFE coated transducer
  • M12 male connector
  • PWM output
  • Power save mode
  • Temperature compensation
  • Customer-specific configuration

더 보기

Product Compliance: Europe – CE
Product Compliance: USA - cURus
Product Compliance: United Kingdom – UKCA
참고

Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.

EN
  • EN
  • DE
  • ES
  • FR

UCC4000-50GK-B26-V15-Y70169750 기술 데이터

Sensing range250 ... 4000 mm
Dead band0 ... 250 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 75 kHz
Operating voltageUB2.5 ... 5 V DC
No-load supply currentI0≤ 60 mA at 3.3 V DC
Quiescent current indication< 3 µA In standby mode
Power consumptionP0≤ 250 mW in the measurement operating mode
Time delay before availabilitytv≤ 95 ms
Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Resolution16 mm (corresponding to 1 LSB)
Input typeStandby active
Signal levellow: 0 ... 0.8 V
Output typePWM output (PNP) , not short-circuit protected
Resolutionpulse length 10 µs /cm
Output currentmax. 10 mA
Temperature influence3 % of full-scale value over the entire temperature range
Electromagnetic compatibility
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3
The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
UL approvalUL Recognized , General purpose , Class 2 power source
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Connection typeConnector plug
Degree of protectionIP67
Material
HousingPBT
Transducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
Connector
ThreadingM12 x 1
Number of pins5
Mass115 g
Dimensions
Height54 mm
Width50 mm
Length50 mm
Default settingTemperature compensation
Address setting 7
Beam widthwide
Scope of delivery2 nuts plastic
일반 참고 사항