NBN4-F25-2Z4L-V1 Inductive Sensor

주요 혜택 한눈에 보기

  • Direct mounting on standard actuators
  • Small construction with sturdy plastic housing of protection class IP 67
  • 2-wire DC sensor with minimum off-state current
  • M12 male connector
Product Compliance: Europe – CE
Product Compliance: USA - cULus LISTED
Product Compliance: United Kingdom – UKCA
참고

Pepperl+Fuchs GmbH 또는 Pepperl+Fuchs AG 명의로 전환 이전에 발행된 인증서, 적합성 선언서 등 모든 제품 관련 서류는 Pepperl+Fuchs SE에도 적용됩니다.

EN
  • EN
  • CS
  • DE
  • ES
  • FR
  • IT
  • PL
  • PT
  • SV

NBN4-F25-2Z4L-V1 기술 데이터

Switching function2 x normally open (NO)
Output typeTwo-wire with minimum off-state current
Rated operating distancesn4 mm
Installationflush mountable
Output polarityDC
Assured operating distancesa0 ... 3.24 mm
Actual operating distancesr3.6 ... 4.4 mm typ.
Reduction factor rAl 0.6
Reduction factor rCu 0.45
Reduction factor r304 1
Reduction factor rSt37 1.2
Output type2x 2-wire
Operating voltageUB5 ... 30 V DC
Switching frequencyf0 ... 500 Hz
HysteresisHtyp. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage dropUd≤ 4.5 V
Operating currentIL4 ... 100 mA
Off-state currentIr120 ... 200 µA typ. 175 µA at 25 °C
Time delay before availabilitytv≤ 100 ms
Switching state indicatorLED, yellow
Standard conformity
StandardsEN IEC 60947-5-2
UL approvalcULus Listed
Circuitry: Class 2 Power Source
Enclosure Type Rating: Type 1
Supply/Switching Voltage: 30 V DC
Output Switching Current: 200 mA
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Connection typeConnector plug
Connector housingmetal
Housing materialPBT
Sensing facePC
Degree of protectionIP67
Connector
ThreadingM12 x 1
Number of pins4
Mass49 g
Tightening torque, fastening screwsM5 x 25 : ≤ 2.7 Nm
Dimensions
Height20 mm
Width52 mm
Length52 mm
NoteMounted on mechanical drive
일반 참고 사항

관련 페이지

더 많은 정보를 찾고 계신가요? 관련 페이지에서 자유롭게 자세히 알아보세요.