Wybierz kraj
IQT1-FP-IO-V1 RFID Read/Write Device
HF RFID read/write device with IO-Link in accordance with ISO 15693
Najważniejsze zalety w skrócie
- Operating frequency 13.56 MHz
- IO-Link interface
- Conforms to ISO 15693
- Suitable for FRAM transponder
- LEDs as function indicators
- Connection via V1 (M12 x 1) plug connection
- Degree of protection IP67
- For connection to IO-Link master
Pokaż więcej









Uwaga
Wszystkie dokumenty dotyczące produktów, takie jak certyfikaty, deklaracje zgodności itp., które zostały wydane przed przekształceniem pod nazwą Pepperl+Fuchs GmbH lub Pepperl+Fuchs AG, mają również zastosowanie do spółki Pepperl+Fuchs SE.
EN
- EN
- DE
Dane techniczne produktu IQT1-FP-IO-V1
| Operating frequency | 13.56 MHz | ||||||||||
| Transfer rate | 26 kBit/s | ||||||||||
| Sensing range | |||||||||||
| |||||||||||
| MTBF | 140 a (Operation at +40 °C) | ||||||||||
| LED red/green | Green: power on Flashing green: IO-Link communication Flashing red/green: IO-Link communication interrupted | |
| LED blue/yellow | Blue: Write/read attempt performed Yellow: Read/write tag detected |
| Rated operating voltage | Ue | 20 ... 30 V DC , ripple 10 %SS |
| No-load supply current | I0 | ≤ 70 mA (at 24 V DC) |
| Power consumption | P0 | ≤ 2 W |
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Process data | Input 32 Byte Output 32 Byte | |
| Vendor ID | 1 (0x0001) | |
| Device ID | 4194561 (0x400101) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 4 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A Class B |
| Radio equipment | |||||
| |||||
| RoHS | |||||
| |||||
| Electromagnetic compatibility | EN 301489-3 | |
| Degree of protection | EN 60529 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
| UL approval | E87056 cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. | |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. | |
| MIC approval | AC-21098 | |
| Radio approval | USA: FCC IREIQT1FPIO Canada: 7037A-IQT1FPIO |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP67 | ||||||||||
| Connection | connector M12 x 1 | ||||||||||
| Material | |||||||||||
| |||||||||||
| Installation | |||||||||||
| |||||||||||
| Mass | approx. 380 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
Powiązane strony
Szukasz więcej informacji? Zapraszamy do zapoznania się z naszymi stronami poświęconymi tej tematyce.




