• Przejdź do nawigacji
  • Przejdź do wyszukiwania
  • Przejdź do treści
  • Przejdź do stopki
Pepperl+Fuchs logo
  • Produkty
    Przegląd "Produkty"
    • Produkty
    • Czujniki przemysłowe
      • Czujniki przemysłowe
      • Inclination and Acceleration Sensors
      • Level Measurement
      • LiDAR Sensors
      • Photoelectric Sensors
      • Positioning Systems
      • Proximity Sensors
      • RFID and Optical Identification
      • Radar Sensors
      • Rotary Encoders
      • Safety for Factory Automation
      • Sensors for Entrance Automation
      • Ultrasonic Sensors
      • Vibration Monitoring
      • Vision Sensors
      • Accessories
      • Connection Technology
    • Komunikacja przemysłowa i interfejsy
      • Komunikacja przemysłowa i interfejsy
      • AS-Interface
      • Displays and Signal Processing
      • Ethernet-APL
      • Fieldbus Infrastructure
      • HART Interface Solutions
      • HMI Systems
      • IO-Link
      • Industrial Ethernet
      • Multiport Serial Cards
      • Power Supplies
      • Remote I/O Systems
      • Signal Conditioners
      • Smart Systems
      • Surge Protection Barriers
      • Thin Clients
      • Connection Technology
      • Software
    • Urządzenia mobilne
      • Urządzenia mobilne
      • Data Capturing
      • Headsets and Remote Speaker Microphones
      • Measurement and Calibration
      • Portable Lights
      • Smartphones
      • Tablets
      • Accessories
      • Software
    • Produkty i rozwiązania przeznaczone do stosowania w obszarach zagrożonych
      • Produkty i rozwiązania przeznaczone do stosowania w obszarach zagrożonych
      • Control Units and Control Stations
      • Control and Distribution Panels
      • Enclosures and Cable Glands
      • Ethernet-APL
      • Fieldbus Infrastructure
      • Industrial PCs and Monitors (HMI)
      • Intrinsic Safety Barriers
      • Network Technology
      • Purge and Pressurization Systems
      • Remote I/O Systems
      • SIL-Capable Products for Hazardous Areas
      • Sensors for Hazardous Areas
      • Signaling Devices, Safety Switches, and Switch Disconnectors
      • Smartphones and Tablets
      • Surge Protection Barriers
      • Terminal and Junction Boxes
      • Zener Barriers
  • Rozwiązania
    Przegląd "Rozwiązania"
    • Rozwiązania
    • Czujniki i systemy dostosowane do indywidualnych potrzeb
    • Rozwiązania techniczne dla obszarów zagrożonych
  • Branże i trendy
    Przegląd "Branże i trendy"
    • Branże i trendy
    • Wyświetl wszystkie aplikacje
    • Branże
      • Branże
      • Motoryzacja
      • Elektronika
        • Produkcja akumulatorów
      • Automatyka bramowa
      • Logistyka
      • Obróbka plastyczna metali
      • Górnictwo i metalurgia
      • Sprzęt mobilny
      • Opakowanie
      • Branża farmaceutyczna i nauki przyrodnicze
      • Urządzenia technologiczne
      • Energia odnawialna
        • Energia wiatrowa
        • Energia słoneczna
    • Trendy
      • Trendy
      • IO-Link Safety
      • Wodór
        • Wytwarzanie energii na potrzeby produkcji ekologicznego wodoru
        • Wytwarzanie wodoru
        • Transport wodoru
        • Wykorzystanie wodoru w przemyśle
        • Stacja tankowania wodoru
      • Rozwiązania z zakresu IIoT
      • Zestaw startowy „Digital Twin”
      • Ethernet-APL
      • Produkcja-X
      • ctrlX AUTOMATION — o dwa kroki do przodu
      • omlox — standard śledzenia zasobów
      • Pracownik połączony z siecią
  • Pomoc techniczna
    Przegląd "Pomoc techniczna"
    • Pomoc techniczna
    • Technologie
      • Technologie
      • Przemysłowe czujniki radarowe — odporne na działanie czynników atmosferycznych
        • Zasada działania czujników radarowych
        • Pasma częstotliwości radarowych
        • Rodzaje czujników radarowych
        • Odbiciowość i typowe przekroje radarowe
        • Właściwości materiałów
        • Konfiguracja i możliwe zastosowania czujników radarowych
        • Zalety czujników radarowych
        • Słownik terminów dotyczących czujników radarowych
      • Technologia komunikacyjna IO-Link
      • Technologia wielopikselowa (MPT)
      • Technologia pomiaru odległości za pomocą impulsów
      • The Ethernet Advanced Physical Layer
      • Purge and Pressurization Technology—Bebco EPS®
        • Benefits of Purge and Pressurization Systems
        • Configure Your Purge and Pressurization System
        • Components of a Purge and Pressurization System
        • Types of Purge and Pressurization Systems
        • Operation Principle of Purge and Pressurization Systems
        • Design Considerations for Purge and Pressurization Systems
    • Uzyskanie pomocy
      • Uzyskanie pomocy
      • Zapytaj eksperta
      • Wniosek o odniesienie
      • Obliczanie wartości PFD/PFH zgodnie z normami EN 61508 i VDI/VDE 2180
    • Obsługa klienta
      • Obsługa klienta
      • Portal internetowy Pepperl+Fuchs
      • Sprawdź status swojego zamówienia
      • Szkolenia i seminaria
        • Seminarium online poświęcone ochronie przed wybuchem ATEX
        • Seminarium online — zaawansowane seminarium dotyczące ATEX
        • Online—Functional Safety (SIL) Seminar
      • Informacje o poszczególnych urządzeniach
      • Engineering Data
    • Powiadomienia i aktualizacje
      • Powiadomienia i aktualizacje
      • Cybersecurity Information and Reporting
      • Przegląd aktualizacji oprogramowania układowego WILSEN
      • Informacje o aktualizacji oprogramowania dla terminali cienkich klientów
        • Update Service for Thin Client Software
      • Informacje o aktualizacji dla urządzeń Tab-IND
      • Serwis informacyjny RSS dla PANOS
      • Umowy serwisowe dotyczące urządzeń mobilnych
    • Wiedza i literatura
      • Wiedza i literatura
      • Bazy wiedzy dotyczące czujników przemysłowych
        • Knowledge Base for Inductive Sensors
        • Knowledge Base for Capacitive Sensors
        • Knowledge Base for Magnetic Field Sensors
      • Baza wiedzy dotycząca elektrycznej ochrony przed wybuchem
      • Przegląd produktów w zakresie czujników przemysłowych
      • Przegląd produktów z zakresu komunikacji przemysłowej i interfejsów
      • Przegląd produktów z zakresu urządzeń mobilnych
      • Product Overviews for Hazardous Area Products and Solutions
      • White Papers
        • Ultrasonic Sensor Technology Guides
        • Functional Safety Compendium
        • White Paper "The Path to a Safe Machine"
        • White Paper "TCP-Based Communication Protocols as Enabling Technologies for IIoT"
        • White Paper "Transformation der Prozessautomatisierung durch Digitalisierung"
        • White Paper Check Out
        • White Paper "How to Select an Enclosure Protection Vent"
        • White Paper "Transforming Process Automation with Digitilization"
  • Kariera
  • Aktualności
    Przegląd "Aktualności"
    • Aktualności
    • Stay in Touch
      • Stay in Touch
      • Update Service for Thin Client Software
      • Pepperl+Fuchs e-news
    • Public Relations
    • amplify—The Pepperl+Fuchs Magazine
    • Blog
  • Firma
    Przegląd "Firma"
    • Firma
    • O nas
      • O nas
      • Historia firmy Pepperl+Fuchs
      • Zrównoważony rozwój w firmie Pepperl+Fuchs
    • Zakupy w firmie Pepperl+Fuchs
      • Zakupy w firmie Pepperl+Fuchs
      • Informacje dotyczące oceny dostawcy
      • Download Area
      • Postępowanie w przypadku zmian w produktach oraz wycofania produktów z oferty
      • Jak zostać nowym dostawcą
      • Zgodność z przepisami
    • Zgodność z przepisami w przedsiębiorstwie
      • Zgodność z przepisami w przedsiębiorstwie
      • Code of Conduct
      • Global Policies
      • Packaging Material
      • Take-Back and Recycling in the EU—WEEE
      • Whistleblowing and Complaints Procedure
    • Certificates
      • Certificates
      • ISO Certificates
      • Other Certificates
      • Product Conformity
  • Skontaktuj się z nami
Wyszukiwanie w witrynie
Wybierz kraj

Przejdź do globalnej strony internetowej

Produkty

Grupa produktów
Hazardous Area Products and Solutions
Wybierz grupę produktów
Pokaż produkty (1809)
  1. pl
  2. Produkty
  3. Produkty i rozwiązania przeznaczone do stosowania w obszarach zagrożonych
Widok listyWidok listy
  • Widok kartWidok kart
  • Widok listyWidok listy

Produkty i rozwiązania przeznaczone do stosowania w obszarach zagrożonych

Zapraszamy do zapoznania się z naszą kompleksową ofertą dla stref zagrożonych wybuchem — od komponentów i urządzeń służących do ochrony przed wybuchem po systemy projektowane na zamówienie, posiadające certyfikaty międzynarodowe oraz objęte globalnym wsparciem technicznym.
Preferowany typ
KCD2-SLD-Ex1.1245

Solenoid Driver

1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 45 mA at 12 V DC, Line fault transparency (LFT), Test pulse immunity, Housing width...

1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 45 mA at 12 V DC, Line fault transparency (LFT), Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Line fault transparency, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC , loop powered, Type: logic input, Type [2]: field device supply, Test pulse immunity, Field device: 1 x Valve

Przejdź do produktu
Cena1617,00PLN
Dodaj do koszyka
Produktbild: Solenoid Driver KCD2-SLD-Ex1.1245
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-STC-Ex1.2O

SMART Transmitter Power Supply

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Signal splitter (1 input and 2 outputs),...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Signal splitter (1 input and 2 outputs), Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V, Terminal blocks with test sockets, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC

Przejdź do produktu
Cena2340,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KCD2-STC-Ex1.2O
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-STC-Ex1.ES

SMART Transmitter Power Supply

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V,...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V, Sink or source mode, Line fault detection (LFD), Housing width 12.5 mm, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: 2-wire transmitter, Field device [2]: current source

Przejdź do produktu
Cena1752,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KCD2-STC-Ex1.ES
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SH-Ex1.T.OP

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for approved dry contacts or SN/S1N sensors, Active voltage output, Relay contact output, Fault...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for approved dry contacts or SN/S1N sensors, Active voltage output, Relay contact output, Fault indication output, Line fault detection (LFD), Up to SIL 3 acc. to IEC/EN 61508, Up to PL d acc. to EN/ISO 13849, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 20 ... 30 V DC, Field device: SN/S1N sensor, Field device [2]: volt-free contact

Przejdź do produktu
Cena2324,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SH-Ex1.T.OP
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-STC5-Ex1

SMART Transmitter Power Supply

1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 4 mA ... 20 mA...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 4 mA ... 20 mA current sink/current source, Terminals with test points, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Rated voltage: 18 ... 30 V DC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source

Przejdź do produktu
Cena1513,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KFD2-STC5-Ex1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-VR4-Ex1.26

Voltage Repeater

1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V ... -20 V, Vibration sensor inputs, Voltage/current field supply, Voltage output 0...

1-channel isolated barrier, 24 V DC supply (Power Rail), Voltage input 0 V ... -20 V, Vibration sensor inputs, Voltage/current field supply, Voltage output 0 V ... -20 V, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the control system, Safety Integrity Level (SIL): SIL 2, Rated voltage: 19 ... 30 V DC, Signal: 1 x -20 ... 0 V, Signal: 1 x -20 ... 0 V, Cut-off frequency: 10 kHz (-0,1 dB) , 20 kHz (-1 dB)

Przejdź do produktu
Cena2293,00PLN
Dodaj do koszyka
Produktbild: Voltage Repeater KFD2-VR4-Ex1.26
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD0-SD3-Ex1.1045

Solenoid Driver

1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 10 V DC, Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to...

1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 10 V DC, Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: loop powered, Type: logic input, Type [2]: field device supply, Test pulse immunity, Field device: 1 x Valve, Field device [2]: 1 x audible alarm, Field device [3]: 1 x visual alarm

Przejdź do produktu
Cena1140,00PLN
Dodaj do koszyka
Produktbild: Solenoid Driver KCD0-SD3-Ex1.1045
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD0-SD3-Ex1.1245

Solenoid Driver

1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 12 V DC, Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to...

1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 12 V DC, Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: loop powered, Type: logic input, Type [2]: field device supply, Test pulse immunity, Field device: 1 x Valve, Field device [2]: 1 x audible alarm, Field device [3]: 1 x visual alarm

Przejdź do produktu
Cena1140,00PLN
Dodaj do koszyka
Produktbild: Solenoid Driver KCD0-SD3-Ex1.1245
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-SLD-Ex1.1065

Solenoid Driver

1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 65 mA at 10 V DC, Line fault transparency (LFT), Test pulse immunity, Housing width...

1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 65 mA at 10 V DC, Line fault transparency (LFT), Test pulse immunity, Housing width 12.5 mm, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Line fault transparency, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC , loop powered, Type: logic input, Type [2]: field device supply, Test pulse immunity, Field device: 1 x Valve

Przejdź do produktu
Cena1617,00PLN
Dodaj do koszyka
Produktbild: Solenoid Driver KCD2-SLD-Ex1.1065
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-STC-Ex1.2O.ES

SMART Transmitter Power Supply

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Signal splitter (1 input and 2 outputs),...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Signal splitter (1 input and 2 outputs), Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V, Terminal blocks with test sockets, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: 2-wire transmitter

Przejdź do produktu
Cena3042,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KCD2-STC-Ex1.2O.ES
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-STC5-Ex2

SMART Transmitter Power Supply

2-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 4 mA ... 20 mA...

2-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 4 mA ... 20 mA current sink/current source, Terminals with test points, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 18 ... 30 V DC, Field device: 2-wire transmitter

Przejdź do produktu
Cena2521,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KFD2-STC5-Ex2
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-ST-Ex2

Switch Amplifier

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 active transistor outputs, Reversible mode of operation, Line fault...

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 active transistor outputs, Reversible mode of operation, Line fault detection (LFD), Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection

Przejdź do produktu
Cena1178,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KCD2-ST-Ex2
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-EB2

Power Feed Module

Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication

Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication

Przejdź do produktu
Cena559,00PLN
Dodaj do koszyka
Produktbild: Power Feed Module KFD2-EB2
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-EB2.R4A.B

Power Feed Module

Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication

Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indication

Przejdź do produktu
Cena568,00PLN
Dodaj do koszyka
Produktbild: Power Feed Module KFD2-EB2.R4A.B
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SH-Ex1

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for approved dry contacts or SN/S1N sensors, Relay contact output, Fault indication output,...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input for approved dry contacts or SN/S1N sensors, Relay contact output, Fault indication output, Line fault detection (LFD), Up to SIL 3 acc. to IEC/EN 61508, Up to PL d acc. to EN/ISO 13849, Housing width: 40 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 20 ... 35 V DC, Field device: SN/S1N sensor, Field device [2]: volt-free contact, Line fault detection

Przejdź do produktu
Cena3147,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SH-Ex1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SR2-Ex1.W

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of...

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact)

Przejdź do produktu
Cena855,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SR2-Ex1.W
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SR2-Ex1.W.LB

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Usable as signal splitter (1 input and 2 outputs), Relay contact output,...

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Usable as signal splitter (1 input and 2 outputs), Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact

Przejdź do produktu
Cena931,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SR2-Ex1.W.LB
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SR2-Ex2.W

Switch Amplifier

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of...

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)

Przejdź do produktu
Cena1131,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SR2-Ex2.W
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SRA-Ex4

Switch Amplifier

4-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 50 % less wiring, 2:1 technology, Relay contact output, Line fault...

4-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 50 % less wiring, 2:1 technology, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Housing width: 20 mm, Number of channels: 4-channel, 2:1 Method, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 4 x relay (NO contact), Reversible mode of operation

Przejdź do produktu
Cena2133,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-SRA-Ex4
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-ST3-Ex1.LB

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 active transistor outputs, Usable as signal splitter (1 input and 2...

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 active transistor outputs, Usable as signal splitter (1 input and 2 outputs), Reversible mode of operation, Line fault detection (LFD), Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection

Przejdź do produktu
Cena1025,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KFD2-ST3-Ex1.LB
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-STC5-Ex1.2O

SMART Transmitter Power Supply

1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Signal splitter (1 input...

1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Signal splitter (1 input and 2 outputs), Dual output 4 mA ... 20 mA current sink/current source, Terminals with test points, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 18 ... 30 V DC

Przejdź do produktu
Cena2338,00PLN
Dodaj do koszyka
Produktbild: SMART Transmitter Power Supply KFD2-STC5-Ex1.2O
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
LB9006C

Power Supply

Power supply for 24 V, Permits vertical or horizontal mounting in Zone 2, Use three power supplies for redundancy, Galvanic isolation to mains, Voltage: 5.4 V...

Power supply for 24 V, Permits vertical or horizontal mounting in Zone 2, Use three power supplies for redundancy, Galvanic isolation to mains, Voltage: 5.4 V DC +/- 5% , , 12 V DC + 4/- 2%

Przejdź do produktu
Cena2474,00PLN
Dodaj do koszyka
Produktbild: Power Supply LB9006C
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NBB20-U1K-N0

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Construction type:...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Construction type: VariKont ®, Series: VariKont ®, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0021X, Equipment protection level Gb: IECEx PTB 11.0021X, Equipment protection level Da: IECEx PTB 11.0021X, Equipment protection level Mb: IECEx PTB 11.0021X, Equipment protection level Ga: PTB 00 ATEX 2032 X

Przejdź do produktu
Cena478,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NBB20-U1K-N0
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NBB8-18GM50-E2-3G-3D

Inductive Sensor

Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M18, Construction type:...

Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Equipment protection level Gc (ec): IECEx TUR 21.0017X, Equipment protection level Dc (tc): IECEx TUR 21.0018X, Equipment protection level Dc (tc): TÜV 20 ATEX 8524 X, Connection type: cable, Housing material: brass, nickel-plated

Przejdź do produktu
Cena552,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NBB8-18GM50-E2-3G-3D
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NBN40-L2-A2-V1-3G-3D

Inductive Sensor

Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: VariKont L...

Switching function: complementary, Output type: PNP, Installation: non-flush, Output polarity: DC, Output type: 4-wire, Construction type: VariKont L ®, Series: VariKont L ®, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Equipment protection level Gc (ec): IECEx TUR 21.0019X, Equipment protection level Dc (tc): IECEx TUR 21.0020X, Equipment protection level Dc (tc): TÜV 20 ATEX 8526 X, Connection type: Connector plug, Housing material: PA

Przejdź do produktu
Cena438,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NBN40-L2-A2-V1-3G-3D
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB1,5-8GM25-N0-V1

Inductive Sensor

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type:...

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M8, Construction type: Cylindrical, thread, Series: Cylindrical type, Suitable for 2:1 technology, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena320,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB1,5-8GM25-N0-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB10-30GM40-N0

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M30,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Dc (tc): IECEx TUR 21.0018X

Przejdź do produktu
Cena449,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB10-30GM40-N0
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB10-30GM40-N0-V1

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M30,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena449,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB10-30GM40-N0-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB2-12GM35-N0

Inductive Sensor

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type:...

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X

Przejdź do produktu
Cena264,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB2-12GM35-N0
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB2-12GM35-N0-V1

Inductive Sensor

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type:...

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X

Przejdź do produktu
Cena272,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB2-12GM35-N0-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB5-18GM40-N0

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Dc (tc): IECEx TUR 21.0018X

Przejdź do produktu
Cena354,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB5-18GM40-N0
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCB5-18GM40-N0-V1

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena357,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCB5-18GM40-N0-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NCN4-12GM35-N0-V1

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Thread mold: M12,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena272,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NCN4-12GM35-N0-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NJ2-V3-N

Inductive Sensor

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type:...

Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Construction type: Rectangular, Series: Rectangular type, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0021X, Equipment protection level Gb: IECEx PTB 11.0021X, Equipment protection level Da: IECEx PTB 11.0021X, Equipment protection level Mb: IECEx PTB 11.0021X

Przejdź do produktu
Cena343,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NJ2-V3-N
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NJ5-18GM-N

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena433,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NJ5-18GM-N
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NJ5-18GM-N-V1

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X

Przejdź do produktu
Cena433,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NJ5-18GM-N-V1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
NJ8-18GK-N

Inductive Sensor

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Thread mold: M18,...

Extended temperature range, Switching function: Normally closed (NC), Output type: NAMUR, Installation: non-flush, Output type: 2-wire, Thread mold: M18, Construction type: Cylindrical, thread, Series: Cylindrical type, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X, Equipment protection level Gb: PTB 00 ATEX 2048 X

Przejdź do produktu
Cena433,00PLN
Dodaj do koszyka
Produktbild: Inductive Sensor NJ8-18GK-N
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
UPR-03

Power Rail

Power Rail®
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to...

35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chains

Przejdź do produktu
Cena1157,00PLN
Dodaj do koszyka
Produktbild: Power Rail UPR-03
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
UPR-03-S

Power Rail

Power Rail®
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to...

35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chains

Przejdź do produktu
Cena529,00PLN
Dodaj do koszyka
Produktbild: Power Rail UPR-03-S
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
Z728

Zener Barrier

1-channel, DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mountable, Type: DC...

1-channel, DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mountable, Type: DC version, positive polarity

Przejdź do produktu
Cena489,00PLN
Dodaj do koszyka
Produktbild: Zener Barrier Z728
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
Z779

Zener Barrier

2-channel, DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mountable, Type: DC...

2-channel, DC version, positive polarity, Working voltage 26.5 V at 10 µA, Series resistance max. 327 Ω, Fuse rating 50 mA, DIN rail mountable, Type: DC version, positive polarity

Przejdź do produktu
Cena627,00PLN
Dodaj do koszyka
Produktbild: Zener Barrier Z779
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
Z966

Zener Barrier

2-channel, AC version, Working voltage 10 V at 10 µA, Series resistance max. 166 Ω, Fuse rating 50 mA, DIN rail mountable, Type: AC version

2-channel, AC version, Working voltage 10 V at 10 µA, Series resistance max. 166 Ω, Fuse rating 50 mA, DIN rail mountable, Type: AC version

Przejdź do produktu
Cena697,00PLN
Dodaj do koszyka
Produktbild: Zener Barrier Z966
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-RR2-Ex1

Resistance Repeater

1-channel isolated barrier, 24 V DC supply (Power Rail), Resistance and RTD input (Pt100, Pt500, Pt1000), Resistance output, Accuracy 0.1 %, Line fault...

1-channel isolated barrier, 24 V DC supply (Power Rail), Resistance and RTD input (Pt100, Pt500, Pt1000), Resistance output, Accuracy 0.1 %, Line fault detection (LFD) for Pt100, Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Transfer direction: to the control system, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: resistance thermometer, Signal: Resistance

Przejdź do produktu
Cena1816,00PLN
Dodaj do koszyka
Produktbild: Resistance Repeater KCD2-RR2-Ex1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-SOT-Ex1.LB

Switch Amplifier

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR input, 2 passive transistor outputs, Usable as signal splitter (1 input and 2...

1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR input, 2 passive transistor outputs, Usable as signal splitter (1 input and 2 outputs), Reversible mode of operation, Line fault detection (LFD), Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact

Przejdź do produktu
Cena1087,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KCD2-SOT-Ex1.LB
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KCD2-SOT-Ex2

Switch Amplifier

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 passive transistor outputs, Reversible mode of operation, Line fault...

2-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 passive transistor outputs, Reversible mode of operation, Line fault detection (LFD), Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection

Przejdź do produktu
Cena1361,00PLN
Dodaj do koszyka
Produktbild: Switch Amplifier KCD2-SOT-Ex2
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFA6-ER-Ex1.W.LB

Conductive Switch Amplifier

1-channel isolated barrier, 230 V AC supply, Level sensing input, Adjustable range 1 kΩ ... 150 kΩ, Relay contact output, Fault relay contact output,...

1-channel isolated barrier, 230 V AC supply, Level sensing input, Adjustable range 1 kΩ ... 150 kΩ, Relay contact output, Fault relay contact output, Adjustable time delay up to 10 s, Minimum/maximum control, Line fault detection (LFD), Housing width: 20 mm, Number of channels: 1-channel, Conductivity measurement, Min./max. control, Time delay, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Signal: Resistance, Line fault detection, Type: 2 x relay (change-over contact)

Przejdź do produktu
Cena1443,00PLN
Dodaj do koszyka
Produktbild: Conductive Switch Amplifier KFA6-ER-Ex1.W.LB
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD0-RO-Ex2

Relay Module

2-channel isolated barrier, 24 V DC supply (loop powered), Logic input 15 V DC ... 30 V DC, non-polarized, Relay contact output, Up to SIL 3 acc. to IEC/EN...

2-channel isolated barrier, 24 V DC supply (loop powered), Logic input 15 V DC ... 30 V DC, non-polarized, Relay contact output, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 3, Rated voltage: 15 ... 30 V DC , loop powered, Type: 2 x logic input, Type: 2 x relay (change-over contact)

Przejdź do produktu
Cena972,00PLN
Dodaj do koszyka
Produktbild: Relay Module KFD0-RO-Ex2
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD0-TR-Ex1

RTD Converter

1-channel isolated barrier, 24 V DC supply (loop powered), 2- or 3-wire Pt100 RTD input, Output 4 mA ... 20 mA, temperature linearization selectable, DIP...

1-channel isolated barrier, 24 V DC supply (loop powered), 2- or 3-wire Pt100 RTD input, Output 4 mA ... 20 mA, temperature linearization selectable, DIP switch selectable ranges, Sensor breakage detection, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 12 ... 35 V DC loop powered, Type: 3-wire connection, Field device: resistance thermometer, Signal: 1 x 4 ... 20 mA (current sink)

Przejdź do produktu
Cena1721,00PLN
Dodaj do koszyka
Produktbild: RTD Converter KFD0-TR-Ex1
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Preferowany typ
KFD2-SCD2-Ex1.LK

SMART Current Driver

1-channel isolated barrier, 24 V DC supply (Power Rail), Current output up to 650 Ω load, HART-IP and valve positioner, Line fault detection (LFD), Accuracy...

1-channel isolated barrier, 24 V DC supply (Power Rail), Current output up to 650 Ω load, HART-IP and valve positioner, Line fault detection (LFD), Accuracy 0.1 %, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, Transfer direction: to the field, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC, Signal: 2 x 4 ... 20 mA, Line fault detection

Przejdź do produktu
Cena1777,00PLN
Dodaj do koszyka
Produktbild: SMART Current Driver KFD2-SCD2-Ex1.LK
Skontaktuj się z nami, aby uzyskać informację o przewidywanym terminie dostawy.
Quantity
  • 12
  • 50
  • 100

49 / 1809

Powiązane strony

Szukasz więcej informacji? Zapraszamy do zapoznania się z naszymi stronami poświęconymi tej tematyce.

VisuNet FLX

Pepperl+Fuchs' VisuNet FLX line offers you the freedom and flexibility to customize an HMI solution that exactly fits your needs-whether you are looking for a full HMI system, panel PC, thin client or direct monitor ...

Functional Safety Hub | Factory Automation

Visit the Functional Safety Hub from Pepperl+Fuchs where you find safety assessed devices for factory automation applications and also get access to helpful tools and brochures.

Rozwiązania dla urządzeń technologicznych

Czujniki i systemy mają zasadnicze znaczenie dla zautomatyzowanych zakładów przetwórczych zlokalizowanych w strefach zagrożonych wybuchem gazu oraz w trudnych warunkach środowiskowych. Firma Pepperl+Fuchs oferuje szeroki wachlarz rozwiązań, m.in. dla przemysłu chemicznego, farmaceutycznego oraz naftowo-gazowego.

Technologia interfejsów — system K firmy Pepperl+Fuchs

Technologia interfejsów firmy Pepperl+Fuchs cieszy się uznaniem i ugruntowaną pozycją w branżach przetwórczych na całym świecie. Dowiedz się więcej o systemie K – jego bogatej ofercie produktów, certyfikatach uznawanych na całym świecie, wyjątkowej wszechstronności oraz łatwości obsługi

VisuNet RM Shell Firmware

The VisuNet RM Shell 6 with additional Control Center software is the latest firmware generation for remote monitors and box thin clients. Learn more about the innovative software.

Powiązane wiadomości i zastosowania

Zapoznaj się z najnowszymi wiadomościami i zastosowaniami dotyczącymi wybranych przez Ciebie produktów.

overview of new surge protection modules
Products and Solutions
28.10.2026

New Surge Protection Modules: Improved Safety for Signal, Fieldbus, and Ethernet Lines in the Process Industry

The new surge protection modules reliably protect signal and data lines—as compact screw-in solutions installed directly on field devices, as plug-in modules for the K-System, or as high-performance protection solutions for entire fieldbus segments.
Więcej informacji
Series 6000 purge and pressurization system
Products and Solutions
21.04.2026

High-Current Outputs Expand Application Possibilities of 6000 Series Purge and Pressurization System

The enhanced 6000 Series control unit now features two enclosure contacts rated up to 12 A per contact.
Więcej informacji
Na zdjęciu widoczna jest stacja pompowa z wieloma pompami odśrodkowymi ustawionymi w rzędzie

Inteligentny monitoring stanu pomp odśrodkowych

Zestaw startowy „Digital Twin” umożliwia serwisowanie predykcyjne oraz eksploatację zoptymalizowaną pod kątem zużycia energii
Więcej informacji
Purge and pressurization solution protecting frequency converter in hazardous area
Products and Solutions
6.03.2026

Reliable Everywhere: Global Purge and Pressurization Solutions

Learn how purge and pressurization systems from the well-known Pepperl+Fuchs brand Bebco EPS® can provide the solution for various challenging process automation uses cases.
Więcej informacji
komora gazowa z czujnikiem indukcyjnym typu F31K2

Magazyn gazu ziemnego w kawernach o zwiększonej niezawodności

W niniejszym raporcie dotyczącym zastosowania dowiedzą się Państwo, w jaki sposób technologia Ethernet-APL została wdrożona w systemie sterowania procesami w magazynie gazu ziemnego w kawernach.
Więcej informacji
Contact
Zapytaj eksperta
Pepperl+Fuchs logo

Pepperl+Fuchs Sp. z o.o.

ul. Owsiana 12

03-825 Warszawa,

Poland

NIP: 522-28-27-777

E-Mail sales@pl.pepperl-fuchs.com

Phone +48 22 256 97 70

Youtube Linkedin Instagram Blog Newsletter
amplfy—Pepperl+Fuchs Online Magazine
amplify
  • Home
  • Products
  • Industries and Trends
  • Support
  • Career
  • News, Events and PR
  • About Us
  • Whistleblowing
  • Contact Us
  • Search
  • Change Country
Legal NoticeDisclaimerPrivacy PolicyContact Us

© 2026 All rights reserved.